Pufferfiz's Model Workshop

pufferfiz.exblog.jp ブログトップ

タグ:WIP ( 38 ) タグの人気記事

MG Unicorn WIP 1

OK well this as been under my desk for like a year. Had nothing better to do so I picked this one up and started building it.
Not going to do to much with it mod wise but a few things, Including the mandatory knee mod.
Building up the frame (sorry phone photos)

OK now I put the legs together and start working on the knee mod.
Got the steps over at http://www.ebasenet.com/progress-Unicorn_Gundam3.htm
the cuts are the same



see it bends so much better now

Now I cut off the tubling spot of the outer armor


Then I glued a piece of plastic to rebuild that place but glued in on the knee.
I was just going for shape will add depth and configure it better later.

Now the piece folds into the model like such when bent

Well all for now
by pufferfiz | 2009-04-29 14:08 | Gundam Model

1/144 HGUC Sazabi WIP 7

OK so Almost done with this!

Here are all of the parts.

After I panel lined the Body.

Shield with custom decals on it.

Gona Decal every day. Should be done by this weekend? Maybe mon or tues.
by pufferfiz | 2009-01-22 15:05 | Gundam Model

1/144 HGUC Sazabi WIP 6

OK well I have all the mods done and things snapped up for a photo.

Now everything is in a bath of oxiclean to get all the crud out of the cracks.
then I'm going to prime tonight and do any minor mods that I think might be good.
by pufferfiz | 2009-01-12 09:43 | Gundam Model

1/144 HGUC Sazabi WIP 5

OK well got some panel lines done.
Still on track for a Priming session.

So some overview.

Did Finished doing panel lines on the legs and the chest.
cut a notch in the top of the chest piece.
Sharpened the head and V fins.

Here is the overall build so far.

by pufferfiz | 2009-01-10 13:40 | Gundam Model

1/144 HGUC Sazabi WIP 4

Ok here are the finished funnels.

Probably gona be some more work once I prime them. But good for now.

As for today I just glued some non modded pieces together.
Slowed down somewhat since schools has started again.
by pufferfiz | 2009-01-06 15:45 | Gundam Model

1/144 HGUC Sazabi WIP 3

OK well was able to go to the hobby store so I got a few things.
One of them was some tubing.
so guess what I did?

looking at that image it looks really long but it is not that long, only a 3-1/2 extension.
I have those puttied up so when sanded it will have a nice smooth transition from the thicknesses.

All for tonight.
by pufferfiz | 2009-01-04 16:59 | Gundam Model

1/144 HGUC Sazabi WIP 2

Well I have made some progress over these few days.

First i sharpened the edges and the corners of the shield.

Then I put two beads in the black part of the shield.

Then got started on one of the feet.
Cut the toe to extend it. Put in two beads, did some panel lines.

Working my way up I sharpened the piece that goes over the foot and sharpened the black bit.

Behind that I did the panel lines for the back armor.
the bit to the right looks to plain so I think I might redue it.

So here is the whole foot.

all for now.
by pufferfiz | 2009-01-03 16:19 | Gundam Model

1/144 HGUC Sazabi WIP 1

OK well i got this for xmas, and im excited since I have not finished a gundam in a long time. I am not planing much mods for this since I really just want to finish something but ill add some stuff so it does not look to plain.

So it is snapped up and the left arm is modified.

by pufferfiz | 2008-12-31 02:39 | Gundam Model