人気ブログランキング |

Pufferfiz's Model Workshop

pufferfiz.exblog.jp ブログトップ

タグ:WIP ( 38 ) タグの人気記事

MG RX-78-2 Ver Ka WIP

This is the model I will be using to demonstrate things at my Sabotencon Panel.
MG RX-78-2 Ver Ka WIP_a0055093_12302459.jpg

MG RX-78-2 Ver Ka WIP_a0055093_1230589.jpg
MG RX-78-2 Ver Ka WIP_a0055093_1231686.jpg
MG RX-78-2 Ver Ka WIP_a0055093_1231468.jpg
MG RX-78-2 Ver Ka WIP_a0055093_1232458.jpg
MG RX-78-2 Ver Ka WIP_a0055093_12325212.jpg

by Pufferfiz | 2013-08-26 12:32 | Gundam Model

Zvezda 1/35 BTR-80a WIP 2

Back again, been busy with other things but finally have enough done to post another. Going on vacation soon so gona have to book it to get it done by the end of the year. I think I can.

Laid down clay then put acrylic modeling paste on it. Then I dusted dust that I got from outside on it. Came out really nice, had to spray from tan on it to get the right shade but I like the effect of not being uniform that I got on it. There are a few spots I went back and added a little more dust too since there was some light brush strokes but for my first one of these I am pretty happy.

Painting it european green which is pretty simple but the real challenge will getting the effects just right. Though the joy of this is that if I screw up I just lay on some tan so it looks like it is just.

Found some USSR army decals I am going to use.
Zvezda 1/35 BTR-80a WIP 2_a0055093_4265352.jpg
Zvezda 1/35 BTR-80a WIP 2_a0055093_4304640.jpg
Zvezda 1/35 BTR-80a WIP 2_a0055093_4322385.jpg
Zvezda 1/35 BTR-80a WIP 2_a0055093_4344288.jpg

by pufferfiz | 2012-12-07 04:35 | Scale Model

Zvezda 1/35 BTR-80a WIP 1

Well I have been wanting to do a diorama for a while. And I found this kit on the internet so it was a good excuse to spread my wings on new things.

I was nervous when I opened the kit, and unfortunately it was a little beat up from the flight from russia. Some parts missing some parts ripped off their spru.

As I was building the kit I then discovered a lot of the parts just flat out didn't fit. Which is really frustrating. Not that I can't fix it, I can and did, but nothing having them fit makes me rethink If the part is on right. But in the end all I can say is the kit is unique and I like that, and the issues are really just the price to pay for having a unique kit.

I also got some afgan-russian war figures which I am going to use for the diorama.
So YES it is not historically accurate since the 80a model was not introduced till after the war was over. but I don't care, I feel it is close enough that only people that know their history will notice and they are usually pissed off about something anyways.

Zvezda 1/35 BTR-80a WIP 1_a0055093_5134365.jpg
Zvezda 1/35 BTR-80a WIP 1_a0055093_5143150.jpg
Zvezda 1/35 BTR-80a WIP 1_a0055093_5151858.jpg
Zvezda 1/35 BTR-80a WIP 1_a0055093_5152929.jpg
Zvezda 1/35 BTR-80a WIP 1_a0055093_5154576.jpg

by Pufferfiz | 2012-10-11 05:16 | Scale Model

Hatsune Miku: Sculpt WIP 18

So I finally got around to building this. And she is done now so I thought I would share some wip pictures before I post the final pictures.

Had to deal with some poor resin, kind of my fault left the bottles out in the garage where It got over 100F degrees.

I went with the stand colors, I wanted it to be a example to show others how to build it.
Though I hope I can get the funds to get new resin so the ones I sell are not terrible, I mean they are ok but not for beginners where this kit was kind of aimed towards.

Didn't really have any trouble painting it, took a lot of masking but was not too bad. the worse was the arms where I had to get the teal bit, not perfectly round so had to cut out a lot of little circles to get it to fit.

Enjoy, look out for information on how to buy one soon!
Hatsune Miku: Sculpt WIP 18_a0055093_936993.jpg
Hatsune Miku: Sculpt WIP 18_a0055093_941315.jpg
Hatsune Miku: Sculpt WIP 18_a0055093_9414046.jpg
Hatsune Miku: Sculpt WIP 18_a0055093_9414793.jpg
Hatsune Miku: Sculpt WIP 18_a0055093_9421765.jpg
Hatsune Miku: Sculpt WIP 18_a0055093_9425046.jpg
Hatsune Miku: Sculpt WIP 18_a0055093_9431187.jpg
Hatsune Miku: Sculpt WIP 18_a0055093_9431865.jpg
Hatsune Miku: Sculpt WIP 18_a0055093_9432934.jpg

by Pufferfiz | 2012-10-09 09:43 | Figure Model

Hatsune Miku: Sculpt WIP 17

Miss me yet? I hope so.
wellll sorry about that delay. with school and low supply + trial and error castings. really added more time then I thought.
But the first batch is here! though, I only have a limited amount right now. I will try and make more if people need them, but it is a lot harder to make them in the dorms then it is at my parents house. But I will do my best.

Well here you are!
Link to purchase (uses paypal, but credit cards can be used when you get to the paypal screen)
here is the parts pic. I Do want to make one up for myself, but running low on resin and what not, much rather make them for you =)
also please excused the poorly place leek, I forgot it :|
Hatsune Miku: Sculpt WIP 17_a0055093_15141874.jpg

Hatsune Miku: Sculpt WIP 17_a0055093_1118529.jpg

by Pufferfiz | 2010-07-05 13:40 | Figure Model

Hatsune Miku: Sculpt WIP 16

Good news and bad news
good news is decals arrived really nicely packed. Remember you will get 2 of them.

that bad news is I ran out of mold rubber.. I guess it was because I am using a different formula, so my calculation was slightly off. off enough for it to require one more bottle. Which i ordered. But that means I won't be able to cast this weekend. Honesly Not sure what is going to happen. the new stuff will come next week (or this week depending on timezone) but I also have school. So yeah. I am really sad, but its not the end of the world.
Hatsune Miku: Sculpt WIP 16_a0055093_12205276.jpg

by pufferfiz | 2010-06-20 12:21 | Figure Model

Hatsune Miku: Sculpt WIP 15

Well This will be the last post before casting!
That is right I am near the end. well actually I am at the end. Just going to check over all the parts then cast them this weekend. I wanted to take a picture of her complete. But since the weights on the parts are not even then they don't all stay and I don't want to glue anything since that might damage the kit. I just hope it looks good when complete! Anyways wish me luck!
Hatsune Miku: Sculpt WIP 15_a0055093_1322619.jpg

by Pufferfiz | 2010-06-17 13:22 | Figure Model

Hatsune Miku: Sculpt WIP 14

OK guys home stretch.
In anticipation, I have opened up the product page on my website. I will be offering the kit for only 35usd. and if you live in us/can then you will get the kit with 2-3day ship for no more than 40 unless you want overnight shipping ( WHY?). Now I only have a stock photo up. And the kit will go into production next week so things may change regarding the description. but that is really worst case, and the price IS fixed so no need to worry about that. I have the quantity set to five as that how many I am making so far. Will add more to the site if need be.

So Come here to pre-purchase, or sign up if you want to wait.

Also, here is a small update, Redid her belt chain thing. Made it out of epoxy and a more exaggerated look to fit the theme.
Hatsune Miku: Sculpt WIP 14_a0055093_81713.jpg

by Pufferfiz | 2010-06-12 13:02 | Figure Model

Hatsune Miku: Sculpt WIP 13

man I can see the finish line! Sooo close!
besides a few things all the sculpting is done. :)

Also got the decals printed, you will get two copies of the decals you see in the picture.

So expect pricing and availability reeeeallllyyy soon.

Also I am still looking for someone to paint this kit. It is so much nicer to display a finished kit instead of a primed one or resin one. So yeah pm for that.

Hatsune Miku: Sculpt WIP 13_a0055093_4433284.jpg

by Pufferfiz | 2010-06-10 04:43 | Figure Model

Hatsune Miku: Sculpt WIP 12


so turns out moving into a new school takes time away from this!

anyways I have settled down so want to show you what progress I have made.
Really coming close! really just eh upper body left to do. then fix all the small errors that I see and the mold will see but you won't but their there so I have to fix them ;_;

Also, Currently negotiating decals so hopefully we can get a sheet settled on soon and get those printed!

Oh, one limitation of the dorm is, there is no where to paint unless I go home, and I can only do that on weekends. So If someone would be interested in painting this model with a fast turnaround, pm me.

ok here she is.
Hatsune Miku: Sculpt WIP 12_a0055093_1471952.jpg

by Pufferfiz | 2010-06-06 14:07 | Figure Model