Pufferfiz's Model Workshop

pufferfiz.exblog.jp ブログトップ

タグ:Hatsune Miku ( 20 ) タグの人気記事

Hatsune Miku: Sculpt WIP 9

Ok so made some progress.
made the skirt. Still needs refinement though.
body is now keyed to the legs.
how is the position of the head? Maybe it is too tilted?

by Pufferfiz | 2010-04-12 06:27 | Figure Model

Hatsune Miku: Sculpt WIP 8

Sorry for not working on here, I was just busy, and broke. But that all has changed so I am back at it.
Just wanted to give a update on how things are going.
really only have one picture to show but it shows how much I have done these few days.
She has arms and legs, and feet.
will be working on smoothing out all of those. plus a skirt and shirt. maybe get the hands done next week. Problem is I have to figure out how I am going to fit the hands on, before I sculpt them. Usually it is the other way around.


by Pufferfiz | 2010-04-05 10:59 | Figure Model

Hatsune Miku: Sculpt WIP 7

Sorry for the lack of updates, Been writing papers for finals :/ still not done but at least have a few days of free time. Finished up the pigtails. Had to go back and forth to get the shape right, but I think I got it now. Also got her headset up, need those 2 cirlces on it but lost my stencil so going to the art store to get a new one (and other things). I guess the bodies up next?

by pufferfiz | 2009-12-13 11:15 | Figure Model

Hatsune Miku: Sculpt WIP 7

Ok back hair is pretty finished. Curved down the part in the middle. I think I might add some horizontal lines on the part, to show separation but not sure. Made her hair ties. Just took styrene strips and glued them together. I did ,before glue, add lines on the strips so that when it comes to paint the pink stripe on them it would be easier. Then I made a cut into the back piece so that they can be placed on the head, and giving the illusion as they are floating. Drilled holes in the middle where the pigtails will go. Used tube to make a clean fit, as well as the pigtails being able to be adjusted slightly. Then got started on the actual pigtails. Just in rough form since I have to build up the putty.


by pufferfiz | 2009-12-01 08:56 | Figure Model

Hatsune Miku: Sculpt WIP 6

Started full force on the back hair piece. Getting the shape just right took a few days, with adding putty, sanding, anylising, then repeat. I think I got it right. I also added small raised platforms on the sides for the headphones to be positioned on. I am at the bottom of my tubs of epoxy putty but fear not I have ordered more so should have it this week. If not I still have enough to make some updates.


by pufferfiz | 2009-11-25 15:59 | Figure Model

Hatsune Miku: Sculpt WIP 5

Some light progress. The hair is finished now. Inless I decide to change it later on. So got working on her head gear. Might redo it since it is not straight or uniform.

by pufferfiz | 2009-11-22 06:22 | Figure Model

Hatsune Miku: Sculpt WIP 4

Small update on the hair. Got the shape where it should be, I think it is fine, Tell me if she looks fine if you wouldn't mind. Next I am going to make the small part of hair that goes under the part to the right. Drilled two holes there for assembly.

by pufferfiz | 2009-11-13 15:42 | Figure Model

Hatsune Miku: Sculpt WIP 3

Some progress. Getting the hair right is very hard. Been sculpting then redoing a lot.

Anyways I think I got the left side down as well as the strand in the middle.
On the side I drilled out a hole then made a box out of styrene then puttied that in, then puttied the strand into it.
Hopefully I can get this hair piece done so I can match it with the back part.




by pufferfiz | 2009-11-11 16:40 | Figure Model

Hatsune Miku: Sculpt WIP 2

OK progress so far. Going fine, Just trying to make everything perfect. I am to ocd on these little imperfections. Well I did manage to get the face done, now I can concentrate on the body. Also Don't mind the colored stuff. I am experimenting with epoxy putty(same stuff I have always been using) and oil paint. Turns out I can change the color. Helps if It is darker since I can then see imperfections better. Also experimenting with liquefying the putty so it is easier to fill in pin holes or other things of that nature.






by pufferfiz | 2009-11-02 13:28 | Figure Model

Hatsune Miku: Sculpt WIP 1

INTRODUCING my new kit!

well it is not done or anything, But the sculpt has started so might as well show everyone the progress.

I am basing this off the same style and same artist.

Since it is simular I will be able to use some of allen's pieces as stepping stones for this one.
Keep in mind this will go back and forth in design, so a lot of this will change by the time it is done. But I wanted to show everyone the process.

Ok pictures incoming!

by pufferfiz | 2009-10-24 05:10 | Figure Model