Pufferfiz's Model Workshop

pufferfiz.exblog.jp ブログトップ

<   2009年 10月 ( 8 )   > この月の画像一覧

Allen Walker: Finished

Sorry for the delay!
Here they are, the final picture set!
Also next week will role out a new way to purchase this kit and more. So if you have any interest please wait till the announcement. Thanks for the support!
a0055093_12305380.jpg

a0055093_12315223.jpg

a0055093_12321645.jpg
a0055093_12323713.jpg

[PR]
by pufferfiz | 2009-10-26 12:34 | Figure Model

Hatsune Miku: Sculpt WIP 1

INTRODUCING my new kit!

well it is not done or anything, But the sculpt has started so might as well show everyone the progress.

I am basing this off the same style and same artist.


Since it is simular I will be able to use some of allen's pieces as stepping stones for this one.
Keep in mind this will go back and forth in design, so a lot of this will change by the time it is done. But I wanted to show everyone the process.

Ok pictures incoming!
a0055093_593987.jpg
a0055093_595145.jpg
a0055093_510529.jpg
a0055093_5101942.jpg
a0055093_5103012.jpg
a0055093_5104132.jpg

[PR]
by pufferfiz | 2009-10-24 05:10 | Figure Model

Allen Walker: the Rest

OK I finished this thing. Came out great. Will have nice photos tomorrow of it overall since it is dark out.

Got a base so going to pin the legs to it.
First I marked spots on the feet.
a0055093_12394823.jpg

then traced the feet on the wood.
a0055093_12413099.jpg

Then I drilled in to the legs and the wood. and placed pins in the legs. and fitted them into the wood.
a0055093_12525315.jpg




ok so there was a bubble on the body so took care of that.
a0055093_12163089.jpg

filled then sanded everything down and primed.
a0055093_12304310.jpg


the sprayed everything down with white primer.
a0055093_12323911.jpg


Then handed painted the black stripes on the coat.
a0055093_12332785.jpg

did the same thing with the feet and masked out the indintations.
then prayed on the black.
a0055093_12355187.jpg


I think sprayed on some gloss and did the panel lines,
a0055093_12574675.jpg

a0055093_1258788.jpg



Then I got out the star, My apolisge on that, It was really hard to cast so those might not always come out right. I try though.
Anyways painted that white.
a0055093_12585974.jpg

then put it on the body
a0055093_12591725.jpg


ok so that is it! Tune in tomorrow for the full shots.
[PR]
by pufferfiz | 2009-10-21 12:59

Allen Walker: The face Part Two

OK head is finished! Here it is!

First off I masked the eyes off.
a0055093_14215147.jpg

Sprayed teal acrylic
a0055093_14222576.jpg

Then added white to the paint and did some gradient on the eyes.
a0055093_1423288.jpg


Took the mask off And for some reason there was a small chip that came off. Well have to fix it. So I placed white enamel on the spot to make it level off with out sanding it.
a0055093_14253282.jpg

Then masked it off to spray skin back on it.
a0055093_14261243.jpg


Then took it off and look it is fixed!
a0055093_14263595.jpg

Then mixed up some dark teal to accent the eyes. used gray enamel and color oil paint.
a0055093_14283877.jpg

then applied it on the eye.
a0055093_14292753.jpg

needs someclean up but that is why I used enamel.
after clean up.
a0055093_14303559.jpg


Then applied flat on the face.
a0055093_14312214.jpg

But flat eyes suck! So I took a DUMP load on the eyes with my bottle of Future.
a0055093_14321697.jpg

:3

Well put all the head pieces together tomorrow!
[PR]
by pufferfiz | 2009-10-07 14:33 | Figure Model

Allen Walker: The face Part one

Promised a face update today. But forgot I did the eyes in acrylic so going to wait till morning before I spray lacquer over it.

Anyways here we go!

Cast is nice, No defect or bubbles on the front side.
a0055093_12221464.jpg

But on the side, that is a different story.
a0055093_12225217.jpg

Doh! Didn't have the mold positioned right so got a large gap. No worries Putty to the rescue!
a0055093_12424463.jpg

Primed to make sure it was ok
a0055093_12461443.jpg


Was good for me so I sanded the rest down
a0055093_12463827.jpg

Then sprayed white primer over it.
a0055093_12471374.jpg


To ensure that the whites of the eyes will be WHITE I masked them off before I lay down the skintone.
First I placed tape over the face and traced the eyes with a pencil.
a0055093_12483831.jpg

Then got a FRESH blade for my knife and cut along the pencil marks.
a0055093_12492960.jpg


Then the masking tape is removed.
a0055093_12525983.jpg

I then layed down the first layer of skin tone. This is my own custom mix. Which does not say a lot because I just made it one night when I felt I needed to make a jar or skin tone.
Layer A is shadows.
a0055093_12505713.jpg

Then a lighter layer B is sprayed all over. This portion is part clear so layer A becomes darker and the piece more defined. though with it being gloss it is hard to tell.
a0055093_12522334.jpg


Allen's scar is then placed. This is tricky since it is a whole piece of decal. Place the decal in water for 20-30 seconds then take it out and place the paper on the face, then slide the decal off while you pull the paper down. Position it. Then place decal set on it so It can conform to the shape of the face.
a0055093_12542148.jpg

Then the portion over the eye is cut off
a0055093_1255289.jpg


I then clear coat gloss over it (lacquer)

Next I mix up the mouth color with white enamel and red and yellow oil paint.
a0055093_12563949.jpg

Then with this brand new 0/5 brush I bought(really nice, should have bought one earlier)
a0055093_12572899.jpg


Anyways with that I place the paint in the mouth and wipe off any excess with mineral spirits
a0055093_1301121.jpg


Next I do the eyebrow. Be careful with this as putting tape over the decal can rip it off if the decal was not set flat.
a0055093_1313812.jpg

Then the tape is removed.
a0055093_1321367.jpg

Touched them up a little but came out good.


Ok part 2 will be tomorrow.
[PR]
by pufferfiz | 2009-10-06 13:02 | Figure Model

Allen Walker: Legs

Legs got done before the head so posting them first.
Should have the head done tomorrow.

First just laid them out, no bubbles.
a0055093_1381598.jpg


Painted the feet white then handpainted black on the top.
a0055093_139652.jpg


then masked the top portion and the strip in the middle.
a0055093_139368.jpg


Then sprayed down more black. Sorry for blurry photo.
a0055093_13101156.jpg


Then got out my epoxy glue. Comes in two parts and you mix them.
a0055093_13104065.jpg


Glued both feet into the leg portion.
a0055093_1311943.jpg


Then clear coated it and put some enamle black into the lines of the stripe. Found out they could have been a little deeper. But oh well.
a0055093_1314328.jpg


All for now.
[PR]
by pufferfiz | 2009-10-05 13:14 | Figure Model

Allen Walker: Back Hair

Time for the back hair!

I know this process is strange but the other parts are almost done too just not ready for a post.

ok anyways
Again another giant bubble on the top. So filled in that
a0055093_1043343.jpg

sanded that down
a0055093_1045278.jpg


Got the white primer out and sprayed that white.
a0055093_1054110.jpg


then back to using the base hair color.
a0055093_106717.jpg

Then sprayed secondary color sprayed on the bottom of the strands and on the back of the strands.
a0055093_107996.jpg


all for now!
[PR]
by pufferfiz | 2009-10-02 10:07 | Figure Model

P-51D Mustang

a0055093_7151936.jpg

Done:
a0055093_1252468.jpg

[PR]
by pufferfiz | 2009-10-01 07:15 | Scale Model
line

Hobby Blog


by PufferFiz
line
クリエイティビティを刺激するポータル homepage.excite
カレンダー
S M T W T F S
1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31