Pufferfiz's Model Workshop

pufferfiz.exblog.jp ブログトップ

カテゴリ:Gundam Model( 47 )

Serpent Custom WIP10

well got the whit done hope you like
preview
a0055093_15554154.jpg

[PR]
by pufferfiz | 2008-05-18 15:55 | Gundam Model

Serpent Custom WIP10

wow finaly after so many months of work the prep stage is done!

wow it looks good dont it
well there were only a few stags which is good.hopefully i dont find anything during the painting stage.
ok here it is
and yes not all the parts are on. some need gluing to stay on.
a0055093_8464930.jpg

ok so im going to preshade and paint the internal areas today.
ill keep yea posted!
[PR]
by pufferfiz | 2008-05-13 08:47 | Gundam Model

Serpent Custom WIP9

so im doing some work on my serpent.

ok so first i start on the guns why idk.

so i did some pre sading of black.
a0055093_13133413.jpg


then i sprayed grey over that.

clear
then i did some panel lining and pasteling.
clear
a0055093_1316376.jpg

gona do the flat coat tomorrow i think if i get time.
[PR]
by pufferfiz | 2008-02-04 13:16 | Gundam Model

Rayleonard 03-Aaliyah WIP11

Wow finaly i have a update!

Well it was been a challenge.
and i have lost only a few parts. less that i thought. But some things were still troublesome.

But all the pieces have been primed!
And then Assorted to its respected baggies!
a0055093_14171031.jpg



then i got started.
Im starting with the main body color.
I really had too since some parts had a little speck of gold or silver so i had to do the blue first.
The base color came out a little green but i think its all good.
a0055093_14184474.jpg

Tomorrow morning im going to do the clear blue mixture over it.

damn i really REALLY hope i can finish on time..

oooo while i was at the art store i found this!
a0055093_1420146.jpg


I SUGGEST GETTING ONE 10000000%!
it is AMAZING. wow now i can see if im getting a 90* cut or not!

Ill update tomorrow.
[PR]
by pufferfiz | 2007-12-24 14:21 | Gundam Model

Rayleonard 03-Aaliyah WIP11

ok well i finished up the chest
unforntunaly i lost the part that is the booster for the overdrive.
it might turn up.
if not i have a funny idea to "replace" it so to speak :P
aswell i got the head and the side skirts done. as well as the crotch.
so i will be moving on to the arms and the uper legs. and that one leg i havnt done yet >.>;
hear you go!
a0055093_72582.jpg

[PR]
by pufferfiz | 2007-11-25 07:03 | Gundam Model

BB SouSou WIP1

hey

so yea i got this yesterday.
snaped it up and im thinking how i can make this better.

diffentently some putty work. maybe ill get a better idea later.
but i dont really plan on working on this a whole lot.
need to finish those 2 other kits first.

well it came in nice box. and a cool comic.
but theres no big picture of what it would look like if painted.
so ill have to get that off the internet.
here yea go!
a0055093_8175038.jpg

a0055093_8191088.jpg

[PR]
by pufferfiz | 2007-11-21 08:20 | Gundam Model

Serpent Custom WIP8

hey so i did some work.

just been doing work and work.
but only these photos today
so here is a partialy assembled kit on my new actionbases.
unfortunaly the thing it came with didnt work with my model.
so i had to think how i was going to get in on.
then i figured it out. the peg atachment. a polycap will fit on it.
ok i got that . but how am i going to get the polycap on the kit.
then i did it. i cut out a hole one the crotch. put some putty in there and put in the polycap. so i got that. then i drilled the right hole into the brown crotch armour. now it can sit on the actionbase!
yea!

ok well here yea go!
a0055093_8104581.jpg
a0055093_8112574.jpg

[PR]
by pufferfiz | 2007-11-21 08:11 | Gundam Model

Rayleonard 03-Aaliyah WIP10

ok i finished one of the legs ( lower part , this picture has the front gaurd missing though, it was just primed in a diffrent set)
comming along.

a0055093_10464052.jpg

a0055093_10514197.jpg



ok well i got that done. everything is able to be painted without seamlines.
and that one part going along the middle horisontaly is not positioned right, it should be higher. its just how i did it you have to hold it down to were its going to be, but it will work.

ok so then i got started on the chest.
wow im not randomly doing this! lol
well here ya go!
will have the chest put together when i finish sanding the core's seam lines
a0055093_1056356.jpg

well more to come in the later days!
[PR]
by pufferfiz | 2007-11-19 14:26 | Gundam Model

Serpent Custom WIP7

ok finaly this fing foot is done.
still have to do one more too!

ok so i worked so hard to get the seamline out and its still there, and in fact it looks worse than when i started...

well crap!
ok here it is compared to the clean one.
a0055093_16154633.jpg

a0055093_1617119.jpg
a0055093_16173847.jpg


worked on the laser gun.
gona finish that tomorrow.
but i lost the handle part. so ima have to make something.
rrr.

sigh.
ug end of december...
iiddkkk
[PR]
by pufferfiz | 2007-11-12 16:18 | Gundam Model

Serpent Custom WIP6

ok here is last nights work

ok well i have been cutting out parts of the gun. as you can see the holes will give light to the internal barrel of the gun. that i used just a styrene tube.
im still fiddling with it to make it work but it will be sweet!
a0055093_7224934.jpg


next are more panals on the legs. after i got these strips i think ima go crazy and put them every where! o no!
well here is a comparison. gona finish that foot today.
a0055093_7231883.jpg

a0055093_723322.jpg

[PR]
by pufferfiz | 2007-10-29 07:24 | Gundam Model
line

Hobby Blog


by PufferFiz
line
クリエイティビティを刺激するポータル homepage.excite
カレンダー
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31